- 1pc Maple Quarter Sawn U-Shape
- Rosewood 250~305mmR w/Compound Radius Fingerboard
- 25.5" (648mm)
- 22F Jumbo w/C.F.S.
- GOTOH® SD91-05M Magnum Lock
- GOTOH® 510TS-FE1
- Tail Piece
- Hardware Color
- Chrome (Bridge) & Nickel
- FGN OS-1n
- FGN OS-1c
- FGN OS-1b
- 1Volume , 1Tone, 5-Way SW, 2Mini Tricky SW
- Body Finish
- D'Addario EXL110 (.010- .046)
- Original Hard Case
- Color Variations
- WB (White Blonde)
Circle Fretting System (C.F.S.)
Slightly curved frets are mounted as each string and fret intersect at right angles to minimize the contact surface.
You can obtain accurate pitch, cleaner longer sustain and true harmonics.
*The frets we use aren't special. You can ask your nearest repair shop to hit them from the edge of the fingerboard when refret.
Z Axis Deep Joint
By setting neck about 1mm deeper than conventional electric guitars, we succeed to reduce the distance between the strings and the body top without forcibly lowering the strings height.
Compound Radius Fingerboard
Gradually increased fingerboard's radius achieves a good balance between chords grip on the lower frets and bending on the higher ones.
Expert Fret Edge
Finely finished fret and FUJIGEN craftsman's handmade fret edge contributes to much smoother fingering.
Moonsault Heel Cutaway Joint
About 5mm thinner joint part of body back allows you to access higher frets easily.
Double Tricky Switch
Direct Output SW and Coil Tap SW both for rear PU inspire your music.